Description
- Channel: Four, isolated between channels
- Five TENS Modes: Burst / Normal / Modulation / SD1 / SD2
Three EMS Modes: Constant / Synchronous, / Alternate / - Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load each channel.
- Wave Form: Asymmetrical Bi-Phasic Square Pulse
- Voltage: 0 to 50V (Load: 500 ohm)
- Power source: Four 1.5V AA batteries or 110v power adaptor
- Size: 13.8cm(L) x 7.8cm(W) x 2.8cm(H)
- Weight: 425 grams with battery
- Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step
- Pulse Width: Adjustable, from 50 to 300 microseconds, 10 µs/step
- Pulse Ramp Time: Adjustable, 1~8 seconds, 1 Sec./ step, The “On” time will increase and decrease in the setting value.
- Contraction Time: 2-90 seconds, 1 sec./step
Relaxation Time: 0-90 seconds, 1 sec./step - Modes: Five TENS Modes: B(Burst), N(Normal), M(Modulation), SD1, SD2 (Strength Duration), Three EMS Modes: C(Constant), S(Synchronous), A(Alternate)
- Timer: Two Adjustable timers, from 1 to 60 minutes or Continuous. Adjustable in 1 minute each step from 1 to 15 minutes, and 5 minutes each step from 15 to 60 minutes. Treatment time countdown automatically.
- Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours.
- Low Battery Indicator: A low battery indicator will show up when the battery is low.
- Operating Condition: Temperature:0°~40°, Relative Humidity: 30%~75%, Atmosphere Pressure : 700Hpa~1060Hpa
- System Includes: device, AC adaptor, four lead wires, eight self-adhesive, reusable electrodes, four AA batteries, hard plastic carrying case and instruction manual
- Remark: There may be up to a +/-5% tolerance of all parameters and +/-20% tolerance of amplitude & voltage.
- Warranty: One year
Reviews
There are no reviews yet.